An AGA cooker can cost from a few thousand pounds to well over £20,000 once you factor in the model, delivery, and any kitchen-ready work.
People shop for an AGA with one number in mind. Then the quote lands and it’s a stack of numbers: cooker, delivery, fitting, electrics, flue work, and a couple of small extras that still sting. This guide keeps it plain. You’ll see where the money goes, what costs are optional, and what costs show up whether you like it or not.
If you’re asking how much do aga cookers cost? because you want a ballpark, start with the table below. It’s built as a budgeting map, not a sales pitch.
| Cost Piece | Typical Range (UK) | What Changes The Number |
|---|---|---|
| Cooker purchase price | ~£4,000 to £26,000+ | Range type, width, ovens, finish, upgrades |
| Delivery to your home | £0 to £400+ | Retailer policy, distance, access limits |
| Removal of an old cooker | £0 to £250 | Weight, access, gas disconnection needs |
| Installation and commissioning | £300 to £1,200 | Model type, fuel, retailer package deals |
| Electrical work | £250 to £1,500+ | New circuit, consumer unit work, cable run length |
| Flue or ventilation work | £0 to £3,000+ | Oil/gas models, route to roofline, building access |
| Kitchen changes | £0 to £2,500+ | Hearth/base, clearances, flooring, wall finish |
| Accessories you’ll likely buy | £50 to £400 | Kettle, pans that fit plates, roasting tins, liners |
| Running costs | Varies by fuel and use | Always-on heat storage vs on-demand cooking |
How Much Do Aga Cookers Cost?
New AGA prices split into two broad families: cast-iron heat-storage cookers (the classic look and feel) and conventional range cookers sold under the AGA name. Both can be great. They just land in different budgets.
A simple way to think about it:
- Entry pricing usually means a smaller conventional range cooker, often in the AGA Masterchef line, or a used purchase.
- Mid pricing tends to mean a new cast-iron model in a standard width, with a standard finish.
- Upper pricing is where wide models, extra ovens, designer colours, and add-on hotplates stack up fast.
Retail lists change, retailers bundle fitting, and deals pop up. So treat any single price tag as a snapshot. Your best “true” number is a full quote that includes delivery and commissioning.
Aga Cooker Costs By Model And Install Work
The model sets your baseline. The house sets your add-ons. Put them together and you get your actual spend.
Before you compare quotes, read the spec page for the exact model line you want. Power needs and oven layout drive both price and install work. One starting point is the official AGA eR7 Series page.
Cast-Iron Heat-Storage Models
These are the ones most people mean when they say “an AGA.” They’re heavy, they heat with stored radiant warmth, and the cooking feel is distinct. They also tend to need more planning: weight, clearance, and the right power supply.
Retailer “from” pricing for new cast-iron models commonly starts in five figures, then climbs with width, ovens, and options. A 100cm model often sits in the mid-to-high five figures once you add delivery and fitting.
AGA Masterchef And Similar Ranges
These are more like other premium range cookers. They use conventional ovens and gas or electric hobs, with the AGA styling cues. They can cost less upfront than a cast-iron heat-storage cooker, and installation can be closer to a standard range cooker job, depending on the fuel type.
In many UK shops, new Masterchef models sit in the few-thousand-pound range, then rise with size and spec. If you want the badge and the look without the heat-storage system, this line is where budgets often land.
Used Aga Prices
Used pricing is all over the place. Condition and fuel type matter more than age on paper. A cheap listing can still turn pricey after you pay for safe removal, transport, parts, and a proper recommission.
If a used cooker is missing service history, assume you’ll spend money on sorting it. That’s not bad news. It’s just budgeting like a grown-up.
What Changes The Total Cost The Most
If you want a fast, realistic estimate, start with these four levers. They create the biggest swing from one home to the next.
Fuel Type And Power Supply
Electric cast-iron models can ask for a dedicated circuit, sometimes more than one. If your consumer unit is older or already packed, an electrician may need to add capacity. Longer cable runs through finished kitchens can also add labour.
Oil and gas models can add flue work, plus fuel-line details that must meet local regs. That’s specialist territory, so prices can jump.
Access Into The House
AGAs are heavy. If the route is tight, steep, or has a turn that barely clears, installers may need extra hands, lifting gear, or even partial disassembly. Ground-floor access with wide doors keeps cost sane. Second-floor kitchens, narrow stairwells, and fresh plaster get pricey fast.
Kitchen Prep Work
Some kitchens are already ready: solid floor, correct clearances, and a clear spot for vents or services. Others need a base, a heat shield, small cabinet edits, or a new splashback once the old cooker comes out.
Plan for at least a little touch-up. Walls behind long-installed cookers can be rough once exposed.
Options And Finishes
Width adds cost. Extra ovens add cost. Upgraded hotplates, warming plates, and specialty colours add cost. This is where budgets drift if you don’t set your must-haves early.
Running Costs: The Ongoing Part People Forget
Upfront spend is the headline. Running costs are the slow drip. With heat-storage models, your settings and habits matter a lot. Some owners keep it on low most of the time. Others run it only when cooking. Both are valid approaches, with different bills.
The cleanest starting point is AGA’s own guidance on usage and running costs. Their breakdown by model and how you run it helps you estimate energy use before you commit. Read it here: AGA running costs.
When you compare running costs, keep your cooking style in mind:
- If you bake daily, a heat-storage setup can feel natural.
- If you cook in short bursts, on-demand models can suit you better.
- If your home is warm already, you may not want extra background heat.
Also check your tariff structure. Daytime rates, off-peak windows, and standing charges can change the picture even when kWh use stays the same.
Installation Costs: What You Pay For And Why
Installation gets lumped into one line item, yet it’s a bundle of jobs. Knowing the parts helps you judge a quote.
Delivery, Positioning, And Leveling
This is the “get it in, get it straight” work. It can include door removal, protective boards, and lifting kit. On heavy models, it’s often the part you don’t want to DIY with mates and a prayer.
Connection And Commissioning
Commissioning is the safety and performance step. The installer checks connections, makes sure the cooker runs as designed, and confirms vents and clearances. If a retailer bundles commissioning in the purchase price, great. If not, budget for it.
Flue And Vent Work
Not every AGA needs a full chimney-style flue, yet some do. This is model-specific and home-specific. If you’re thinking about a fuel-burning model, ask for the flue route plan early, before you order. A late surprise can stall the whole install.
New Vs Used: The Cost Trade-Offs
Buying new buys you a clean spec, current controls, and a straight install path. Buying used can cut the purchase price, yet it shifts risk onto you. Here’s how to keep it sensible.
When A Used Aga Can Make Sense
- You can inspect it in person and see it running.
- You can confirm parts availability for that model.
- You have a realistic plan for transport and recommissioning.
Costs To Add To A Used Listing Price
- Safe disconnect and removal from the seller’s home
- Transport (often specialist due to weight)
- Replacement consumables and worn parts
- Recommissioning in your kitchen
If you’re tempted by a bargain, get quotes for these extras first. A low listing price can still turn into a mid-budget total once the heavy lifting is counted.
Sample Budgets That People Actually Use
Numbers help. So here are practical budgeting bands that match how people shop. These aren’t promises. They’re planning ranges that keep you from falling in love with a model your kitchen can’t feed.
| Buying Route | Upfront Spend Range | Best Fit |
|---|---|---|
| New AGA Masterchef-style range | ~£4,000 to £8,000+ | AGA look with standard cooking setup |
| Used traditional AGA + recommission | ~£2,500 to £12,000+ | Hands-on buyers who can verify condition |
| New cast-iron heat-storage model | ~£12,000 to £26,000+ | Classic cooking feel and radiant ovens |
| New cast-iron wide model (extra ovens) | ~£18,000 to £35,000+ | Big households and frequent hosting |
| Electric conversion of an older unit | ~£4,000 to £10,000+ | Owners updating a cooker they already have |
A Short Cost-Planning Checklist
Before you put money down, run this list. It’s the fastest way to get to a number you can live with.
- Choose the model family (cast-iron heat storage or conventional range cooker).
- Measure your space and the route in, then share photos with the installer.
- Ask for a quote that separates delivery, fitting, and any electrical or flue work.
- Set a buffer for kitchen touch-ups once the old cooker is out.
- Estimate running costs based on how you cook, not how a brochure cooks.
If you came here asking how much do aga cookers cost? you should now have a planning range that matches your home, not just a headline figure. Once you’ve picked the model and confirmed the install needs, the rest is just choosing the finish and getting on with the fun bit: cooking.