AGA cookers often cost £10,000–£26,000 new, while used units often land between £500 and £8,000 once you factor age, model, and fitting.
An AGA isn’t a single product with a single price. It’s a family of heavy, enamelled cookers that vary by width, oven count, fuel type, controls, and extras. Two units can look similar in a photo and still sit miles apart on the invoice.
If you’re pricing up a kitchen, the question “how much do agas cost?” only becomes useful once you separate the cooker price from the costs around it. This guide gives you ranges you can plan with, then shows what pushes the number up or down.
If you want a quick number, use the tables, then confirm your quote with a dealer.
How Much Do Agas Cost? By Model And Fuel
Prices shift by dealer, colour, and configuration, so treat the ranges as planning bands. Start with the model line and width, then add the extras you can’t avoid, like delivery and connection work.
| AGA Type | Typical New Price Band | What Mostly Drives The Price |
|---|---|---|
| eR3 Series (90–110cm) | £10,000–£13,000 | Width, induction zone count, extra ovens |
| R3 Series (110–170cm) | £12,000–£20,500 | More ovens, wider hotplate area, trims |
| Dual Control (3–5 oven) | £14,000–£18,500 | Fuel setup, venting, installation parts |
| eR7 / R7 Series (100–210cm) | £20,000–£27,000+ | Width, induction vs gas top, extra ovens |
| AGA Module Companion | £6,000–£10,000 | Module size, oven layout, hob type |
| Reconditioned AGA (dealer-refurb) | £6,000–£12,000 | Rebuild depth, parts quality, warranty |
| Used AGA (private sale) | £500–£8,000 | Age, condition, missing parts, pickup |
| Ex-display / clearance | £8,500–£22,000 | Model line, cosmetic marks, stock timing |
Those bands line up with publicly listed pricing for current models such as the eR3 and R3, and with dealer listings for higher lines like the eR7. Use the table to set expectations, not to haggle over a single pound.
Aga Prices By Size And Spec Choices
Width And Oven Count
Pricing climbs with physical size. A 90cm unit can fit three ovens into a compact shell, while wider models add capacity and more cooking zones. That’s why the jump from a 100cm to a 150cm can feel steep even if both “look like an AGA.”
Fuel And Control Style
Newer electric lines lean on independently controlled ovens and hotplates. Traditional heat-storage models can be gas, oil, or electric, with different fitting needs. If you’re weighing day-to-day spend, start with AGA’s own notes on model-by-model usage on its AGA Running Costs page.
Hob Setup: Induction, Ceramic, Gas, Or Mixed
Induction tops tend to lift the price, then save time in daily cooking. Mixed tops (induction plus gas) also raise the bill, and may change what your installer needs to fit.
Finish, Trim, And Bespoke Colour
Standard colours cost less. Special editions, extra trim packs, and bespoke enamel colours can add four figures. On used units, a rare colour only helps if the enamel is clean and chip-free.
Kitchen Work That Follows The Cooker
The cooker is heavy, and it wants a level floor, space for vents, and safe clearances. You may need cabinet changes, a fresh hearth, or a new electrical feed. These are the “silent” costs that turn a fair deal into a shock.
New AGA Costs In Plain Terms
Most shoppers land in one of two lanes: a compact electric model for daily cooking, or a larger statement cooker that anchors a big kitchen. Compact models like the eR3 line are often listed from around £10,490, while wider models rise quickly into the teens and twenties. Larger lines like the eR7 series are commonly listed above £20,000 depending on width and hob setup.
When you compare quotes, ask for an itemised breakdown that separates the cooker, delivery, fitting, and any building work. That single step makes it easier to compare like with like.
Delivery And Fitting
Delivery often includes specialist handling. Fitting can involve electrical, gas, or flue work. Some dealers bundle fitting; others price it separately. Either way, treat it as part of the true price, not an optional add-on.
Warranty And Aftercare
New models often carry a manufacturer warranty through the dealer network, plus access to trained engineers. That can be worth paying for if you don’t fancy chasing parts for a cooker that weighs as much as a small car.
Used And Reconditioned AGA Costs
Used AGAs range from “cheap and cheerful” to “expensive project.” The headline price is only the first number. The real number includes removal, transport, missing parts, and the work needed to make it safe and steady.
Used (Private Sale) Price Range
Private listings can start low when the seller needs the cooker gone. A common setup: the buyer pays for disconnection and removal, then arranges haulage. That can still be a bargain if the unit is complete and the enamel is solid.
Reconditioned (Dealer-Refurb) Price Range
Dealer-refurb units cost more up front, but can come with a warranty and clearer history. AGA flags trade-offs in its Reconditioned vs New guide. Use that as your list of questions: who rebuilt it, what parts were replaced, and what the warranty covers.
Conversion Costs
Some older models get converted from oil or gas to electric. The conversion price depends on the kit, the installer, and what state the cooker is in. Ask for the full scope in writing, including any parts that stay original.
Running Costs: A Simple Way To Estimate
Running spend sits in your usage pattern, your tariff, and which parts of the cooker stay on. Many modern electric models let you run ovens and hotplates only when you need them, which changes the maths.
Step 1: Find Your Unit Rates
Start with the per-kWh price on your bill. If you’re on a standard variable tariff in Great Britain, Ofgem posts current cap unit rates and standing charges on its Energy Price Cap Explained page. Your own tariff may be higher or lower, so use your bill for the final calculation.
Step 2: Estimate Weekly kWh From Your Pattern
Write down which parts you run and for how long. Then use this method:
- Ovens on most of the day: assume a steady base load.
- Hotplates used in short bursts: add a smaller, spiky load.
- Warming ovens and plates: treat as a low, steady add-on.
If you don’t know your kWh, measure at the meter for a week, then divide by seven for a daily figure.
Step 3: Multiply And Sanity-Check
Weekly cost = weekly kWh × your unit rate. Add the standing charge if the cooker needs a dedicated supply you wouldn’t have otherwise. You’re aiming for a range you can live with, not a perfect number.
Extra Costs That Catch Buyers Out
Two AGA deals can look identical until you add the “boring” line items. Budget for them early and you avoid a half-finished kitchen.
| Cost Item | Typical Range | When It Shows Up |
|---|---|---|
| Delivery, positioning, and commissioning | £500–£2,000 | New or used, unless pickup is included |
| Electrician: new circuit or upgrade | £300–£1,500 | When your supply can’t handle the load |
| Gas connection or alteration | £250–£900 | Dual fuel or gas models |
| Flue or venting work | £400–£2,500 | Older heat-storage models, some installs |
| Floor strengthening or levelling | £0–£2,000+ | Older floors, suspended timber, renovations |
| Removal of old cooker | £150–£800 | Swap-outs and kitchen refits |
| Re-enamelling or panel repair | £300–£2,000+ | Cosmetic fixes on used units |
| Annual service (where needed) | £0–£300 | Fuel type and local engineer rates |
Choosing The Right AGA For Your Budget
Set Your All-In Ceiling
Pick a ceiling that includes fitting and the work around the cooker. If your kitchen needs a new feed, venting, or flooring, treat that spend as part of the AGA decision.
Match The Cooker To How You Cook
If you cook in bursts, look for models where ovens and hotplates can be switched on and off independently. If you cook daily and like gentle kitchen warmth, a heat-storage style may suit you, but check running spend with the method above.
Don’t Pay For Width You Won’t Use
Bigger feels tempting in the showroom. At home, a narrower cooker that fits your pans and trays can be easier to live with, and it leaves budget for fitting and decent cookware.
Used Buyers: Check Completeness First
Missing shelves, runners, lids, or door liners add cost and hassle. Ask for a full photo set with the doors open. Also ask for the model plate details so you can confirm what it is before money changes hands.
Buying Checklist Before You Hand Over Money
- Confirm model line, width, and fuel type from the plate, not the listing title.
- Ask what’s included: lids, shelves, pans, liners, and controls.
- Inspect enamel for chips, crazing, and rust at seams.
- Check doors for even closing and smooth hinges.
- Get a written plan for delivery routes, lifting gear, and floor protection.
- For used units, price disconnection, haulage, and fitting before you agree.
- Run the running-cost estimate with your tariff, then decide if it fits your monthly spend.
Quick Price Scenarios
These shopping paths show why “how much do agas cost?” is a two-part question: the cooker price, then the costs around it.
- New compact electric AGA: cooker in the £10k–£13k band, plus delivery and electrics, often lands in the low-to-mid teens.
- New larger AGA: cooker in the £20k+ band, plus fitting and any kitchen work, can run well into the twenties.
- Used private-sale AGA: a low purchase price can still end up as a five-figure total if parts, transport, and refurb work stack up.
Judge the deal by the all-in number, not the listing price. That’s the number you’ll feel a month after the cooker is in.